This is version 1.22 C of FTP Download.

This version has been updated on September 15, 1999

It contains OTE212.BIN for updating all 
12.x, 15.x and 40.x NET+ARM based NIC designs.

This Program uses an FTP connection to download and 
install a new executable  code version into your print 
server/network interface card (NIC). To run this program, 
both your workstation and the NIC must have TCP/IP 
enabled and must have been assigned a  valid IP address.
If workstation and printer are on different subnets, 
subnet masks and default routers may also need to be 
entered.

Once loaded, start this program, select the core image file 
to be downloaded, and then enter the IP address of the 
print server to which the code is to be sent. The program 
will ask you for the maintenance password for this unit;
the default password is "sysadm". This password can be 
changed with standard NIC maintenance software.

This download program is used only for updating code
in the NIC's. It is suggested that, once NIC's have been 
downloaded, that this program be un-installed. Download 
programs will be shipped with any future code update.

The latest BIN files for use with the program are:

OTE104.BIN -> all 68340-based Ethernet NICs
OTE212.BIN -> All 12.0, 12.1, 15 and 40 NCC NICs
OTT101.BIN -> All old form-factor Token Ring NICs
OTT202.BIN -> All new form-factor Token Ring NICs

Other BIN files may be included for use with specific products
not listed here.